There are many types of broadheads for bowhunters. Some are cheap, some are expensive, some expand when they hit, and some have fixed blades. It's important to know what makes one broadhead better and last longer than another. This article will help you understand what makes a broadhead a premium broadhead.
Best Ferrule Materials
The ferrule is the main part of the broadhead. It needs to be strong, so it doesn't bend when it hits something. Good materials for ferrules are hardened stainless steel and titanium. Avoid weaker materials like aluminum and non-heat-treated stainless steel because they are more likely to bend.
Best Blade Materials
The blades of a broadhead need to be made of strong steel. This helps them stay sharp and not break. High end blades are made from hardened stainless steel or hardened tool steel. These materials are heat treated to make the blades stronger and more resistant to edge wear. Stainless steel blades like those found on the VBS Broadhead resist rust.
Best One-Piece Head Materials
Some broadheads are made from one piece of metal. These can be made from carbon steel or tool steel (Like the S7 Tool Steel MD3). Carbon steel is tough, but tool steel stays sharp longer. However, tool steel can be harder to sharpen. Both types can rust, so it's good to put a coat of oil on them to protect them.
Can You Resharpen Broadheads?
Yes, if you buy a good broadhead, you can resharpen it. You can use special tools or a buffing wheel with buffing compound. A buffing wheel on a bench grinder works well. For very dull blades, use a high-quality sharpening stone or sandpaper. Start with rough grit and move on to finer grits. Be sure to form a burr at every step.
Conclusion
There is no one "best" broadhead for everyone, but now you know what to look for. Pick a broadhead with good materials and a design you like. Better materials make a better broadhead.
Share:
Will broadheads fly like field points?